News · 23 May 2024
A butterfly valve, or rotary butterfly valve as it is also known, provides a simple way of throttling the flow in various applications. It is often used in the food, pharmaceutical and chemical industries, as well as in water and wastewater systems. In industry, it is often used instead of a ball valve, as the butterfly valve is cheaper, easy to install and takes up little space
The butterfly valve is a simple and inexpensive type of valve. It operates by means of a disc that rotates around an axis and can be set at different angles. Changing the angle of the disc also alters the size of the flow passage. The disc’s shaft is rarely positioned exactly in the centre of the disc. Instead, the disc is often slightly eccentric to allow for different opening speeds depending on the design.
The valve has few moving parts. The construction consists of a valve body, a butterfly disc, a seat and a box packing. It is used for both shut-off and regulation. The butterfly valve provides a rapid response. Full flow through the valve is achieved at just 70 per cent of the opening. In the open position, it allows free flow to a greater extent than other valve types. However, it is not suitable for low opening angles.
At high pressures, this type of valve can be difficult to operate, as it then requires a great deal of force to move the rotary damper. Butterfly valves are therefore better suited to low-pressure applications, such as water and sewage systems. They are also frequently used in pulp mills, in applications involving steam and lye. However, they are not ideally suited to media containing particles, but work best with liquids and gases.
Butterfly valves have three tightness classes. The least tight has no seal at all and cannot be used for shut-off, but only for regulation, by varying the opening between the disc’s outer diameter and the valve’s inner wall. They are most commonly used to regulate a flow of gas in low-pressure applications. Typical applications include flows of air or flue gas.
The more sealing-oriented type has a rubber-lined seat between the disc’s outer diameter and the valve’s inner wall. The seat is attached to the valve body and the disc presses tightly against the seat when closed.
The seat may also have a profile that fits into a chamfer in the valve body, which improves the sealing performance.
Another variant is a soft seal with a hard inner core. The seal is pressed into the seat and held in place because its outer diameter is slightly larger than the seat’s inner diameter. This type of seal is suitable for higher pressures than the types described previously.
The seal may also be glued to the seat.
The seat, together with its seal, is usually slightly wider than the valve body, which means that no additional seal is required when the valve is fitted to the pipework. The exception is hard-sealing butterfly valves used for demanding applications involving high pressure and high temperature. In these cases, flange seals are required during installation.